Template - I used Pooker's template EI#209 - download it HERE

I used Mask from Fran. Masques 2/Masks 2 which can be downloaded HERE.

Fonts - I used SNF Ambrosia PTU, Will&Grace FTU and Singerica Fat FTU font.

Wordart; right click on it and save as:
*Personal use only, can be used for writing tutorials or creating any other tag, 
if you use this wordart freebie in your tutorial, link back to my blog. Thank you*

Open template. Remove first layer - Info.

Go to IMAGE > IMAGE SIZE > WIDTH/HEIGHT : 600.

Now lets fill out template with papers from the kit. 

I used - Paper 17; I filled out all brown parts with this paper

Paper 22, I filled out all cream parts with this paper

Paper 16, I filled out all green parts with this paper

Paper 10, I filled out all blue parts with this paper

I applied on EACH rectangle WHITE STROKE > SIZE 3, 

DROP SHADOW > DISTANCE - 0 , SPREAD - 0, SIZE - 10.

I recolored Arrows in RED COLOR #c00f13, I took red color from the Paper 17.

Open the tube. Close all layers except original tube and ''dress_3'' layer.

Select ''dress_3''layer, IMAGE > ADJUSTMENTS > HUE/SATURATION - HUE: +15, SATURATION +52, LIGHTNESS - -9

Click OK.
Again click on IMAGE > ADJUSTMENTS > LEVELS > INPUT LEVELS > 0 - 0,31 - 255. OK

Final step IMAGE > AUTO TONE for more realistic look. 

Marge all layers. Paste tube on already filled template. 

Make sure your tube layer is selected,  hold CTRT + T.

At the top you will see new tab, underneath Options tab. 

At the moment setting are as follows W: 100% and H: 100% 

Change them to W: 45% and H: 45%. Press ENTER.

Place tube in the middle, as you can see on the tag above. 

DUPLICATE tube, move it underneath original tube layer. 

Recolor layet into dark grey color #2d2828. OK. Make sure that layer is selected.

Click on EDIT > TRANSFORM > DISORT > make settings as follows

X:280,00 PX, Y:312,50 PX, W:109,39%, H 100,26, ANGLE -5,39°, H:+9,25

Press ENTER. Now clik on FILTER > BLUR > LENS BLUR > OK

Hold CTRL +F to repeat same effect. It should be applied 2 times.

Now move your mouse over layer pallete and clik on OPACITY - 80%.

That's it.

Now let's add some elements from the kit. 

I applied  on each elements DROP SHADOW as follows:

BLEND MODE > MULTIPLY

OPACITY > 50%

ANGLE > -40

DISTANCE > 5

SPREAD > 0

SIZE > 9

Use my tag as guidance when adding elements.

After you placed all elements over the template, add  wordart on the very top of the layer palette.

In case if you wanna know - I used SNF Ambrosia PTU and Will&Grace FTU font.

Add your name, I used Singerica Fat FTU font,  color red, white stroke 1 px size,

OUTER GLOW > SIZE 5, COLOR WHITE 

DROP SHADOW > DISTANCE: 5, SPREAD: 0, SIZE: 9

FONT SIZE : 40

Add mask. I used FRg_Masques 2_M4 AND FRg_Masques 2_M5. 

First I added FRg_Masques 2_M5 on right top and left bottom corner as base. I used Paper 35.

Marged it all together. Then I added FRg_Masques 2_M4 mask random over the first mask, 

I used same paper. Merged both masks together. Added Paper 16 to the mask to make it lighter.

Used Eraser tool and deleted with it some random parts to get kind of a gradient effect.

Marge all layers, except your name, RIGHT CLICK > DUPLICATE.

Apply BLEND MODE ON DUPLICATED LAYER on SOFT LIGHT. 

Go to FILTER > BLUR > LENS BLUR. 

Add your copyright information and that is it! I hope you enjoyed and found this tutorial useful.

Hugs.