Grab Our Blinkie
Groups We Love
Certified
Lifetime Member
Favourite Blogs
Showing posts with label PTU TUTORIAL. Show all posts
Showing posts with label PTU TUTORIAL. Show all posts
Tuesday, April 14, 2015
**CT PTU TUTORIAL - Lindsay**
-vm.png)
*This tutorial is written by me using Photoshop CS6 but any version will work.
Any similarity to any other tut is coincidental.*
Supplies:
Tube of choice. I'm using the artwork of Verymany.
You must purchase a license to be able to use their work.
Kit of choice. I'm using PTU kit ScrapCD_IB-Enamorte-33-1
Mask of choice - Mask 64 MB and SW
Font of choice - Rege Italic
Let's get started...
Open new canvas 600x600.
From the kit past Frame3, resize and place it in the center.
Add Drop Shadow as showen:
Click on the Background layer. Then past Frame2, no shadow. On it
add Element19, shadow. Now add Paper1, but remove all so only inside
of frame circle is filled. Click again on the first layer, Frame3.
Past 2 copies of Element16, one on the lef and one on the right frame
side, with shadow on both. On the frame left bottom side add Element9
with shadow. On it place Element8, shadow. Now add full size tube,
resize and place on the frame. As showen on my tag, use Eraser Tool
to remove tubes other half. Then make a tube copy layer. On the original
tube layer add filter Paint Daubs and shadow:
Then for the tube copy layer add filter Gaussian Blur:
And add those setting for the copy layer as well:
Now at the bottom right side place Element9 with shadow. On it add
Element11, shadow. Cover the tube bottom with Element26, shadow.
On it place Element21, Element5 and Element13, shadow on all.
Now let's add mask:
Open your mask as new image.
Mask layer will be called 'Background' and will be locked.
Double click on same layer, press OK. Layer name will be 'Layer 0'.
Add a new layer above it and flood fill with color of choice,
or use a paper from kit. I use Paper 2.
But I added Color Overlay on the paper. Just to make it bit
more pink. Used color #a51a58 with Opacity on 25%.
Click on mask layer and hold CTRL+A to Select All, CTRL+C to Copy.
Click on the paper layer, hit Q to turn on Quick Mask mode.
CTRL+V to paste the mask. It should now be kinda red.
Hit Q to turn off Quick Mask mode
and there should be shown selection on your canvas.
Hit the Add Layer Mask.
On paper layer, right click and Convert to Smart Object.
Right click again and Rasterize Layer.
Drag completed mask to your tag canvas as the bottom layer.
Resize it if needed.
Add proper copyright and your name on tag.
Hide or delete bottom 'Background' layer. And save your tag as .PNG file.
-cin.png)
That's it! Thank you for reading. I would love to see any tags made with this tutorial. You can past the link here as comment or send them to me on al3x_v@ymail.com
Sunday, February 15, 2015
**CT PTU TUTORIAL - Proud & Beautiful**
-vm.png)
*This tutorial is written by me using Photoshop CS6 but any version will work.
Any similarity to any other tut is coincidental.*
Supplies:
Tube of choice. I'm using the artwork of Verymany.
You must purchase a license to be able to use their work.
You may do that at VMT store.
Kit of choice. I'm using PTU kit 'Proud & Beautiful'
by A [Space] Between. You can find it HERE.
Mask of choice - Mask 50 MB and SW
Font of choice - Levitee
Let's get started...
Open new canvas 600x600.
From the kit past Element 66 and place at the center. Drop Shadow:
Click on the background layer, then add Element 57 right around frame
with shadow. On it place Element 48, resize as shown and shadow:
Now add Paper 13, use Eraser Tool to remove extras
(paper should be only inside frame circle). Take full size tube and
place it on the paper right side so only lips are showen. Then right
click on the layer and Create Clipping Mask and set Bend Mode to Overlay.
Make a copy of that layer but set Opacity on 72%. Now take another
full size tube, Flip Horizontal and place it on the paper left side.
Set Blend Mode to Overlay with Opacity on 68%. Make a copy of that,
but no changes. In case some parts of one tube goes over the other tube,
just erese those parts. Click on the frame layer now. From the kit past
Element 48 and place it at the center as it is. Right click on that layer
and Create Clipping Mask. Now place full size tube in the center of frame,
resize as shown:
Use Eraser Tool to remove little at the tube bottom and then make a
tube copy. For the original tube layer use filter Paint Doubs as:
and add shadow. Then click on Adjustment>Hue/Saturation and set as:
Click on that layer then and Create Clipping Mask (it will apply for the
tube only this way). Now go to the Adjustmen>Brightness/Contrast and set:
Again Create Clipping Mask for that layer. Those adjustments are between
two tubes layers. Now for the tube copy layer use filter Guassian Blur:
Also set Blend Mode to Overlay with Opacity on 70%. We'll cover tube
bottom now and all of the elements will have Shadow. First place Element
19 at the tube right side. Add Element 43 then and place it so the right
side of the element be at the canvas center. Make a copy of it and
Rotate 180. Move it little up and to the right side, it should be on the
flower. On that flower add Element 47. On it place Element 25. Make a
copy of it, Flip Horizontal and place on the left ribbon. On it add
Element 47. At the center, between those elements, place Element 63.
In the middle of it past Element 65. Take Element 18, Rotate 180 and
place right from it. On them place Element 42. At the end add again
Element 18 and place it left from the centar, blue flower.
Now let's add mask:
Open your mask as new image.
Mask layer will be called 'Background' and will be locked.
Double click on same layer, press OK. Layer name will be 'Layer 0'.
Add a new layer above it and flood fill with color of choice,
or use a paper from kit. I use Paper 13.
Click on mask layer and hold CTRL+A to Select All, CTRL+C to Copy.
Click on the paper layer, hit Q to turn on Quick Mask mode.
CTRL+V to paste the mask. It should now be kinda red.
Hit Q to turn off Quick Mask mode
and there should be shown selection on your canvas.
Hit the Add Layer Mask.
On paper layer, right click and Convert to Smart Object.
Right click again and Rasterize Layer.
Drag completed mask to your tag canvas as the bottom layer.
Resize it if needed.
Add proper copyright and your name on tag.
Hide or delete bottom 'Background' layer. And save your tag as .PNG file.
-m.png)
That's it! Thank you for reading. I would love to see any tags made with this tutorial. You can past the link here as comment or send them to me on al3x_v@ymail.com
Any similarity to any other tut is coincidental.*
Supplies:
Tube of choice. I'm using the artwork of Verymany.
You must purchase a license to be able to use their work.
You may do that at VMT store.
Kit of choice. I'm using PTU kit 'Proud & Beautiful'
by A [Space] Between. You can find it HERE.
Mask of choice - Mask 50 MB and SW
Font of choice - Levitee
Let's get started...
Open new canvas 600x600.
From the kit past Element 66 and place at the center. Drop Shadow:
with shadow. On it place Element 48, resize as shown and shadow:
(paper should be only inside frame circle). Take full size tube and
place it on the paper right side so only lips are showen. Then right
click on the layer and Create Clipping Mask and set Bend Mode to Overlay.
Make a copy of that layer but set Opacity on 72%. Now take another
full size tube, Flip Horizontal and place it on the paper left side.
Set Blend Mode to Overlay with Opacity on 68%. Make a copy of that,
but no changes. In case some parts of one tube goes over the other tube,
just erese those parts. Click on the frame layer now. From the kit past
Element 48 and place it at the center as it is. Right click on that layer
and Create Clipping Mask. Now place full size tube in the center of frame,
resize as shown:
tube copy. For the original tube layer use filter Paint Doubs as:
tube only this way). Now go to the Adjustmen>Brightness/Contrast and set:
two tubes layers. Now for the tube copy layer use filter Guassian Blur:
bottom now and all of the elements will have Shadow. First place Element
19 at the tube right side. Add Element 43 then and place it so the right
side of the element be at the canvas center. Make a copy of it and
Rotate 180. Move it little up and to the right side, it should be on the
flower. On that flower add Element 47. On it place Element 25. Make a
copy of it, Flip Horizontal and place on the left ribbon. On it add
Element 47. At the center, between those elements, place Element 63.
In the middle of it past Element 65. Take Element 18, Rotate 180 and
place right from it. On them place Element 42. At the end add again
Element 18 and place it left from the centar, blue flower.
Now let's add mask:
Open your mask as new image.
Mask layer will be called 'Background' and will be locked.
Double click on same layer, press OK. Layer name will be 'Layer 0'.
Add a new layer above it and flood fill with color of choice,
or use a paper from kit. I use Paper 13.
Click on mask layer and hold CTRL+A to Select All, CTRL+C to Copy.
Click on the paper layer, hit Q to turn on Quick Mask mode.
CTRL+V to paste the mask. It should now be kinda red.
Hit Q to turn off Quick Mask mode
and there should be shown selection on your canvas.
Hit the Add Layer Mask.
On paper layer, right click and Convert to Smart Object.
Right click again and Rasterize Layer.
Drag completed mask to your tag canvas as the bottom layer.
Resize it if needed.
Hide or delete bottom 'Background' layer. And save your tag as .PNG file.
Thursday, February 12, 2015
I love you PTU TUTORIAL
This tutorial was written by me on Feb 11, 2015 using Photoshop CS6 but any version will work.
Any resemblance to any other tutorial is pure coincidence.
SUPPLIES:
I used the artwork of Verymany. Tube can be purchased - HERE.
You must purchase a license to be able to use their tubes.
I used PTU kit Forever Love from Inzpired Creationz. You can buy it - HERE.
I used Mask from Dee at Dangerously Delicious.
DD_VMask_2 which can be downloaded - HERE.
Fonts - I used Good Karma demo, and Notalot25 for credits. www.dafont.com
Brush (right click and save as):
Open new canvas 450x450.
Take Ribbon_2 element from the kit, resize it as on image below:
Open up tube file, select close up layer, HOLD CTRL+T and reduce close up as follows:
Once done, move close up layer on canvas we are working on, place it below ribbon
layer inside the frame. Like on image below.
Click on MAGIC WAND TOOL, make sure ribbon layer is selected and select area inside the frame.
Hold SHIFT and select area inside the bow.
Now SELECT close up tube layer, move cursor over selected area
- RIGHT CLICK > LAYER VIA COPY. Delete original close up layer.
Now you should have face inside the frame.
Make sure close up tube layer is selected - should be called LAYER 1,
go to IMAGE > ADJUSTMENTS > HUE/SATURATION
Apply settings like on image below:
Duplicate LAYER 1, it should be called LAYER 1 COPY.
Apply BLEDING OPTIONS ON SOFT LIGHT.
Select one more time LAYER 1, go to FILTERS> SHARPEN >SHARPEN.
Apply DROP SHADOW on Ribbon_2 element:
OPACITY - 50%
DISTANCE - 11
SIZE - 10
Go to FILTERS> SHARPEN >SHARPEN Ribbon_2 element.
Take Ribbon_1 element from the kit.
Place it on the canvas and apply settings below:
Go to FILTERS> SHARPEN >SHARPEN Ribbon_1 element.
Place it at the end of layer palette.
Delete part of the ribbon in left corner as we don't need that.
Apply same shadow settings as on Ribbon_2 element.
Add Rose_1 element, reduce it to H: W: 70%
Go to FILTERS> SHARPEN >SHARPEN.
Apply same shadow settings as on Ribbon_2 element.
Add Tag_2 element, leave size as it is.
Go to EDIT > TRANSFORM > ROTATE 90° CW.
Place it below Rose_1 element, as on the tag.
Go to FILTERS> SHARPEN >SHARPEN.
Add drop shadow:
OPACITY - 75%
DISTANCE - 5
SIZE - 5
Add Charm_1 element, leave size as it is, place it above Tag_2 element layer.
Go to FILTERS> SHARPEN >SHARPEN.
Apply same shadow settings as on Tag_2 element.
Add Wordart_4 and place it above Ribbon_1 element layer.
Resize it - I used W:H: settings 184%
Place it as shown on the tag.
Add Diamond_1 above Wordart_4 layer. Leave size as it is.
Go to FILTERS> SHARPEN >SHARPEN.
Apply same shadow settings as on Tag_2 element.
Now add mask, I used Paper_6 from the kit.
If you don't know to how to apply/add mask on PS 6, check my other tutorials,
every step is expained there. I am gonna skip this step on this one tutorial.
Once you make a mask and place it on the tag, use settings as shown below:
PLACE MASK AS LAST LAYER ON LAYER PALETTE.
On the very bottom.
Add brush I supplied to you on canvas. Place it above mask layer.
Add Sparkles_3 element on it as well. Resize it.
Add your copyright information, name and that is it!
I hope you enjoyed and found this tutorial useful.
Monday, February 2, 2015
Glam Glitz PTU tutorial
This tutorial was written by me on February 2, 2015 using Photoshop CS6 but any version will work. Any resemblance to any other tutorial is pure coincidence.
SUPPLIES:
I used the artwork of Gennadiy Koufay.
Gennadiy Koufay has retired from PSP community.
His tubes aren't available for purchase anymore.
I used PTU kit called Glitz from Inzpired Creationz. You can buy it - HERE.
I used Mask from Vix. Vix_Mask365 which can be downloaded - HERE.
Fonts - Bank Gothic and Notalot25 for credits.
Open new canvas W: 700 H: 600
Place GLAM wordart I gave you as show on the tag.
Take PAPER_3 from the kit and place it above GLAM WA. Resize it to match the GLAM WA.
Right click on the PAPER_3 layer > CREATE CLIPPING MASK.
Set adjustments on paper as shown below:
Open tube. Place her on the wordart as shown on the tag.
Tube is a bit bigger so we shall reduce her size.
Hold CTRL+T, now as you can see tube is selected, hold SHIFT and move from
outside to inside any of the corner with your cursor. Just for a bit.
Tube now should be smaller.
Make sure tube layer is selected. Go to FILTER> ARTISTIC> PAINT DOUBS
Match settings as shown below:
Add DROP SHADOW on tube :
Open new canvas - 600x600.
Take Cityscape_1 element from the kit, place it on new canvas and resize it.
Same way as we did with the tube but this time move cursor from INSIDE > OUT.
Use my tag as guidance to match the size of the element. Once you place it, duplicate Cityscape_1 element
RIGHT CLICK ON LAYER > DUPLICATE
Move duplicated layer up, like on image below:
( I used white stroke for example, to show line between two elements, do not add it on yours elements)
Once you placed elements like on image above,
SELECT ERASER TOOL > SELECT SOFT ROUND PRESSURE SIZE BRUSH
Any size will work, I used size 50.
Now we are merging two elements into one, using eraser tool.
Delete bottom of the duplicated layer, this shadowed/ black area on the bottom of the buildings.
You should have something like this:
Now select both layers holding SHIFT key.
RIGHT CLICK > MERGE LAYERS.
Now move finished element on the canvas where we started making tag .
Place cityscape element behind GLAM WA. In the middle.
Select cityscape element. Go to FILTER> ARTISTIC> PAINT DOUBS.
Apply same settings as we used on the tube.
Add drop shadow:
Add rest of the elements on the tag.
Use my tag as guidance.
I applied PAINT DOUBS effect on each element, using same settings as on tube and cityscape.
DROP SHADOW > DISTANCE - 5 > SPREAD - 0 > SIZE - 5
OPACITY - 50%
Once done with placement of elements, place GLITZ WA on the bottom of tag.
Make sure this wordart is above all elements and tube.
Grab GLAM2 wordart, place it on the top of tag, as on my tag.
Make sure that wordart is behind all elements.
Now add mask on the tag. Open your mask.
Mask layer will be called 'Background' and will be locked.
Double click on same layer, press OK.
Add a new layer above it and flood fill with color of choice, or use a paper from kit.
I used PAPER_10.
Click on mask layer and hold CTRL+A to Select All, CTRL+C to Copy.
Click on the paper layer, hit Q to turn on Quick Mask mode.
CTRL+V to paste the mask. Hit Q to turn off Quick Mask mode
and there should be shown selection on your canvas. Hit the Add Layer Mask.
On paper layer, right click and Convert to Smart Object.
Right click again and Rasterize Layer.
Drag completed mask to your tag canvas as the bottom layer.
Resize it if needed.
Okay.
Add your name, I used BANK GOTHIC font in yellow color, #dea62b
Add stroke in white color, SIZE: 2
FONT SIZE : 36
OUTER GLOW > COLOR: #c4803b
Add your copyright information and that is it! I hope you enjoyed and found this tutorial useful.
Hugs
Saturday, January 10, 2015
**CT PTU TUTORIAL - White Love**
-vm.png)
*This tutorial is written by me using Photoshop CS6 but any version will work.
Any similarity to any other tut is coincidental.*
Supplies:
Tube of choice. I'm using the artwork of Verymany.
You must purchase a license to be able to use their work.
Kit of choice. I'm using PTU kit 'And Two Become One'
Mask of choice - FM2
Font of choice - Volstead
Let's get started...
Open new canvas 600x600.
From the kit past Element 78, resize and place at the center. Apply
Drop Shadow - Opacity 45%, Angle -58, Distance 5 and Size 7. Go back
to the background layer and click on it. Now past Paper 3, resize it
to fit empty circle from the frame. Use Eraser Tool to remove paper
extras. Then open the tube file and past close up. Resize it a little,
Flip Horizontal and place little more to the left inside the circle.
Clik on the tube layer and Create Clipping Mask then make a cop
layer of the tube. On the original tube layer set Blend Mode to
Luminosity. And for the copy layer use filter Gaussian Blur on 5,0
and set Blend Mode to Screen. Click on the frame layer above. From
the kit past Element 35 and place it at the frame left side. Appy
shadow - Opacity 45%, Angle 120, Distance 5 and Size 7. Make a copy
of that layer, Flip Horizontal and place at the frame right side.
On those place Element 23 with shadow. Now go to the tube file
and move layer 'girl' to the canvas. Resize it and place little more
at the frame rigt side. Then add Elements 2 and 58 at the tube
head branch. Aplly soft shadow on 30% on both of them. Select those
2 elements layers along with tube layer and Convert to Smart Object.
Then make a copy of it. For the original tube layer use filter Paint
Doubs - Brush Size and Sharpness on 1 and Brush Type on Simple.
Aply shadow - Opacity 45%, Angle -23, Distance 5 and Size 7. For
the tube copy layer use filter Gaussian Blur on 5,0 pix and set
Blend Mode on Overlay with Opacity on 45%. Use Eraser Tool to remove
half of the tube legs. Then past Element 26 on it with shadow -
we use the same shadow for all elements as it's written above, tube
and frame only have different angle. Add Element 74, no shadow,
but use Eraser Tool to remove parts that covers both of tubes. Past
3 copies of Element 48 - place one at the tube right side, one
at the tube left leg and the last one left from the tube, shadow
on all of them. At the center flover past Element 56, shadow.
Between that flower and one on the left place Element 27 with shadow.
On it add Element 16, shadow. Make a copy of it, Flip Horizontal
and place at the flower on the right side. Now add 2 copies of
Element 35, one from center left and other from center to the right,
with shadow on both. On it past Element
Now let's add mask:
Open your mask as new image.
Mask layer will be called 'Background' and will be locked.
Double click on same layer, press OK. Layer name will be 'Layer 0'.
Add a new layer above it and flood fill with color of choice,
or use a paper from kit. I use Paper 1.
Click on mask layer and hold CTRL+A to Select All, CTRL+C to Copy.
Click on the paper layer, hit Q to turn on Quick Mask mode.
CTRL+V to paste the mask. It should now be kinda red.
Hit Q to turn off Quick Mask mode
and there should be shown selection on your canvas.
Hit the Add Layer Mask.
On paper layer, right click and Convert to Smart Object.
Right click again and Rasterize Layer.
Drag completed mask to your tag canvas as the bottom layer.
Resize it if needed.
Add proper copyright and your name on tag.
Hide or delete bottom 'Background' layer. And save your tag as .PNG file.
-m.png)
That's it! Thank you for reading. I would love to see any tags made with this tutorial. You can past the link here as comment or send them to me on al3x_v@ymail.com
Wednesday, November 26, 2014
**CT PTU TUTORIAL - Christmas Coffee**
-vm.png)
*This tutorial is written by me using Photoshop CS6 but any version will work.
Any similarity to any other tut is coincidental.*
Supplies:
Tube of choice. I'm using the artwork of Verymany.
You must purchase a license to be able to use their work.
Kit of choice. I'm using PTU kit 'Mr. Snowman'
Font of choice - AGRevueCry
Let's get started...
Open new canvas 600x600.
From the kit past Frame 2 and place it in the middle. Drop Shadow on
it - Opacity 45%, Angle 120, Distance 5 and Size 5. No go back to
the background layer and click on it. Past Paper 12, resize then use
Eraser Tool to remove the extra to fit the frame empty space. Add
close-up tube, resize it and place at the frame right side. Right
click on the tube layer and Create Clipping Mask. Set Opacity on 55%
for the tube. Now click on the frame layer. From the kit past
Element 33, resize it and place at the frame right side. Use Eraser
Tool to remove extras, so only canes be on the frame, no shadow. On
the frame left side place Element 3, resize and shadow. Cover the
tree with few copies of Element 22, no shadow on them. At the tree
top add Element 38 with shadow. On the tree right side past Element 13,
shadow. At the frame bottom place Element 15, shadow on 35%. Then add
Element 17 with shadow at the bottom of that one. On the green bottom
right place Element 37, the Element 14 on it with shadow on both.
Now open the tube PSD file and turn off all of the layers but the main
tube. Then turn on layer laggings_4 and double click on that layer.
Chose Color Overlay with color pink (#ffb0dc) and set Blend Mode on Color.
Then turn on layer dress_4 and set Color Overlay with color pink (#f68ac7)
and Blend Mode on Color. Select those 3 layers that are on and Convert
to Smart Object. Move that layer to the tag canvas, resize and place
in the center. Now make a copy of the tube layer. For the original layer
use filter Paint Doubs - Brush Size and Sharpness on 1 and Brush Type
on Simple. Add Drop Shadow on that layer - Opacity 45%, Angle -146.
For the tube copy layer use filter Gaussian Blur - Radius 5,0 pixels.
Set Blend Mode on Screen with Opacity on 55%. On the tube right side
place Elements 11, 19, 8, 16, 30, 19 and 4 in that order with shadow on
all. Then on the tube left side add Elements 16, 29, 19, 20, 19, 24
and 27 in that prder with shadow on all. Use my tag for exact placem
of all of them. We'll add two masks - first mask 5 then mask 10.
Now let's add mask:
Open your mask as new image.
Mask layer will be called 'Background' and will be locked.
Double click on same layer, press OK. Layer name will be 'Layer 0'.
Add a new layer above it and flood fill with color of choice, or use
a paper from kit. I use Paper 7 for mask 5 and Paper 3 for mask 10.
Click on mask layer and hold CTRL+A to Select All, CTRL+C to Copy.
Click on the paper layer, hit Q to turn on Quick Mask mode.
CTRL+V to paste the mask. It should now be kinda red.
Hit Q to turn off Quick Mask mode
and there should be shown selection on your canvas.
Hit the Add Layer Mask.
On paper layer, right click and Convert to Smart Object.
Right click again and Rasterize Layer.
Drag completed mask to your tag canvas as the bottom layer.
Resize it if needed.
Add proper copyright and your name on tag.
Hide or delete bottom 'Background' layer. And save your tag as .PNG file.
-kk.png)
That's it! Thank you for reading. I would love to see any tags made with this tutorial. You can past the link here as comment or send them to me on al3x_v@ymail.com
Subscribe to:
Posts
(Atom)
Alex CT For
Marilyn CT For
Check Me!
AD Service
Marilyn AD Service
If you have more questions, or interested in purchasing the product contact me via dina.gaco@hotmail.com; or FACEBOOK Dina Marilyn ...
Favourite Stores
